Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Heal Force Bio-meditech Holdings Limited
6788 Songze Avenue, Qingpu District,
201706
Shanghai
China
China
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
Jeff Jiang
Sales Manager
Laboratory Equipment Business Unit
Laboratory Equipment Business Unit
John Zhang
Sales Manager
Perinatal Care Business Unit
Perinatal Care Business Unit
Jason Cheng
Sales Manager
Homecare&Rehabilitaion&IOT Bussiness Unit
Homecare&Rehabilitaion&IOT Bussiness Unit
Rupert Lu
Sales Manager
OR & Intensive Care Business Unit
OR & Intensive Care Business Unit
Andrew An
Sales Manager
OR & Intensive Care Unit
OR & Intensive Care Unit
Vladimir Liu
OR & Intensive Care Unit
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.02 Imaging supplies
- 01.02.03 X-ray devices and accessories
X-ray devices and accessories
- 01 Electromedical equipment / medical technology
- 01.03 Surgery devices, endoscopy devices
- 01.03.09 Electrosurgical instruments (HF)
Electrosurgical instruments (HF)
- 01 Electromedical equipment / medical technology
- 01.06 Intense medicine / anesthesiology / respiration
- 01.06.01 Anesthesiology equipment, anesthesiology systems
Anesthesiology equipment, anesthesiology systems
- 01 Electromedical equipment / medical technology
- 01.06 Intense medicine / anesthesiology / respiration
- 01.06.03 Patient monitoring systems
Patient monitoring systems
- 01 Electromedical equipment / medical technology
- 01.06 Intense medicine / anesthesiology / respiration
- 01.06.05 Incubators, warmers
Incubators, warmers
- 01 Electromedical equipment / medical technology
- 01.08 Operating technology and operating equipment
- 01.08.02 Surgical lights, booms
Surgical lights, booms
- 01 Electromedical equipment / medical technology
- 01.08 Operating technology and operating equipment
- 01.08.03 Operating tables and surgery tables
Operating tables and surgery tables
- 01 Electromedical equipment / medical technology
- 01.09 Hospital equipment, care equipment
- 01.09.02 Patient beds and nursing beds
Patient beds and nursing beds
- 01 Electromedical equipment / medical technology
- 01.09 Hospital equipment, care equipment
- 01.09.07 Mobile medical supply units
Mobile medical supply units
- 01 Electromedical equipment / medical technology
- 01.09 Hospital equipment, care equipment
- 01.09.08 Neonatal care equipment
Neonatal care equipment
- 02 Laboratory technology
- 02.02 Centrifuges
- 02 Laboratory technology
- 02.09 Laboratory equipment
Laboratory equipment
- 02 Laboratory technology
- 02.12 Laboratory water purification systems
Laboratory water purification systems
- 03 Diagnostic tests
- 03.06 Genetic testing, molecular diagnostics
- 03.06.03 Polymerase chain reaction (PCR)
Polymerase chain reaction (PCR)
- 04 Physiotherapy / orthopaedic technology
- 04.12 Rehabilitation equipment and devices
Rehabilitation equipment and devices
- 06 Information and communication technology
- 06.04 eHealth, telemedicine / telematics / telemetry
eHealth, telemedicine / telematics / telemetry
Our products
Product category: Electrosurgical instruments (HF)
EB05 Electrosurgical Generator
EB05 is a versatile system designed to deliver standard and argon-enhanced electrosurgery.
It features 10 different power setting, 9-channel program memory, max.400 watt floating output and optional Argon-enhanced system to give optimal cutting and coagulation with minimal tissue damage, which well combines safety and effectiveness for a broad range of electrosurgical needs, like General surgery, Cardiology, ENT surgery, Gastroenterology, Gynaecology, Laparoscopy, Neuro surgery, Plastic surgery, Thoracic surgery and Urology (like TURP, TUVP).
Features and Performance of EB05
It features 10 different power setting, 9-channel program memory, max.400 watt floating output and optional Argon-enhanced system to give optimal cutting and coagulation with minimal tissue damage, which well combines safety and effectiveness for a broad range of electrosurgical needs, like General surgery, Cardiology, ENT surgery, Gastroenterology, Gynaecology, Laparoscopy, Neuro surgery, Plastic surgery, Thoracic surgery and Urology (like TURP, TUVP).
Features and Performance of EB05
- Adaptive Tissue Technology: No restrictions of tissue characteristics, electrode selection, and cutting amplitude factors ensures constant cutting quality.
- 9-channel Program Memory: Up to 9-channel setting memory for quick response to routine surgery.
- Automatic Memory of Preset Power and Mode: The device is automatically set to the mode and power of the last operation when it is turned on, without resetting.
- Two-Channel Output of Coagulation: Convenient for hemostasis needs of emergency traumatic surgery and coronary artery bypass grafting (CABG)
- Type CF Low-Frequency Electric Current Isolation: All Floating, IEC60601-1 & IEC60601-2-2 internationally certified.
- Safety System: The audible and visual alarm will be triggered if accessory connection error, operation error, host failure occur when operating. Automatic energy monitoring can monitor high-frequency leakage to prevent personal burns caused by leakage.
Product category: Electrosurgical instruments (HF)
EB03 Electrosurgical Generator
EB03 electrosurgical generator comes up with two versions "Grey" and "White".
The twin systems allow for the same mono & bipolar working modes but with different power range.
It has integrated 7 different monopolar and bipolar modes, tissue responding, and automatic return electrode monitoring to give an intuitive indication of potential burn risk, which enables highly efficient and safe surgical cutting and coagulation through all types of tissue.
Features
Application
EB03 is applicable in various surgeries such as general surgery, dermatology, plastic surgery, endoscopy, vascular surgery, heart/thoracic surgery, minimally invasive surgery, neurosurgery, and ophthalmology.
The twin systems allow for the same mono & bipolar working modes but with different power range.
It has integrated 7 different monopolar and bipolar modes, tissue responding, and automatic return electrode monitoring to give an intuitive indication of potential burn risk, which enables highly efficient and safe surgical cutting and coagulation through all types of tissue.
Features
- EB03 electrosurgical generator comes with an easy to use interface.
- It ensures smooth cutting through all types of tissue.
- The electrosurgical generator has automatic current monitoring and program memory function.
- It offers a maximum output of 350 watts/150 watts.
- It has 6 monopolar and 1 bipolar output.
- The electrosurgical unit features isolated output, all floating.
- Adaptor for laparoscopy and thoracoscopy application is optional.
Application
EB03 is applicable in various surgeries such as general surgery, dermatology, plastic surgery, endoscopy, vascular surgery, heart/thoracic surgery, minimally invasive surgery, neurosurgery, and ophthalmology.
Product category: Rehabilitation equipment and devices
HF3000 Spot-Check Monitor | Pelvic Floor Rehabilitation
A smart rehabilitation device that guides patients throughout all the training by biofeedback technology.
Neuromuscular electrical stimulation combined with biofeedback technology helps to rebuild the connection between damaged neurons and muscle systems.
The equipment is precise enough to give training tailored for the patient to help the patient recover.
Features
Dual Evaluation
Electromyography based evaluation and surface EMG based muscle fatigue evaluation
Neuromuscular Electrical Stimulation
Strengthen muscle and correct wrong behavior
Solutions tailored for patients makes the whole rehabilitation safe and easy
Feedback and Stimulation Training
A great combination of active training and passive training. Strengthen the muscle while rebuilding the premotor cortex functionality.
Template Training
All the major rehabilitation modes. Active training designed for people with different muscle strength
Clinical Application
Neurology: Cerebral stroke, Traumatic brain injury Rehabilitation: Spinal cord injury, muscle weakness, myositis, peripheral nerve injury, muscular dystrophy
Neuromuscular electrical stimulation combined with biofeedback technology helps to rebuild the connection between damaged neurons and muscle systems.
The equipment is precise enough to give training tailored for the patient to help the patient recover.
Features
Dual Evaluation
Electromyography based evaluation and surface EMG based muscle fatigue evaluation
Neuromuscular Electrical Stimulation
Strengthen muscle and correct wrong behavior
Solutions tailored for patients makes the whole rehabilitation safe and easy
Feedback and Stimulation Training
A great combination of active training and passive training. Strengthen the muscle while rebuilding the premotor cortex functionality.
Template Training
All the major rehabilitation modes. Active training designed for people with different muscle strength
Clinical Application
Neurology: Cerebral stroke, Traumatic brain injury Rehabilitation: Spinal cord injury, muscle weakness, myositis, peripheral nerve injury, muscular dystrophy
Product category: X-ray devices and accessories
Digital Mobile C-Arm X-Ray System
- JD8600 Mobile C-arm X-ray System is compact, lightweight, and flexible.
- Featuring industry-leading high-frequency generator VPW (Variable Pulse Width) to optimize image quality with a lower dose. FPS (frames per second) up to 15, which gives you a clear and transparent mobile image.
- Ease of use in clinical operation: with stable and efficient hardware equipment, safe and flexible mechanical design, the touch screen control panel can be rotated and tilted to realize the synchronous operation of the main unit and the cart.
- Smart archive management: Quickly and easily view patients' data anytime.
- Distortionless image acquisition and processing technology promote the accuracy of the surgery to a new level. Perfect image chain can realize easy application in various regular surgeries in orthopedics, general surgeries, trauma surgeries, spine surgeries, urology surgeries, pain surgeries, etc.
- Various kinds of detectors and abundant extensions are available, which ensures high cost-effectiveness.
Product category: Anesthesiology equipment, anesthesiology systems
Anaeston 3000 Anaesthesia Machine
Anaeston 3000 anaesthesia machine provides an affordable and flexible anaesthesia solution for now and the future. Our customers can start with a routine application. The anaesthesia machine is upgradeable to better meet customers' anaesthetic requirements. Modern anaesthetic workstation expansion is also feasible to greatly improve the workflow and cut down the operating cost.
Anaeston 3000 anaesthesia machines can be used for inhalational anaesthesia delivery and management for adult, pediatric and neonatal patients.
- The anesthetic machine offers electronic PEEP function.
- It has automatic tidal volume compensation, except Anaeston 3000C.
- It provides a high-precision output as low as 20ml.
- The anesthetic machine uses autoclavable and latex free components.
- It can be easily maintained and cleaned without specialized tools.
- It is CE certified, giving users peace of mind.
Anaeston 3000 anaesthesia machines can be used for inhalational anaesthesia delivery and management for adult, pediatric and neonatal patients.
Product category: Anesthesiology equipment, anesthesiology systems
Anaeston 5000 Anaesthesia Machine
- Anaeston 5000 anaesthesia machine offers a high-precision output as low as 20ml.
- It has automatic tidal volume and compliance compensation.
- The anaesthesia machine offers spontaneous and manual respiratory MV monitoring function.
- It has electronic PEEP function.
- The anaesthesia delivery workstation uses autoclavable and latex-free components.
- Users can benefit from the tool-free maintenance and cleaning of this equipment.
- The anaesthesia machine is CE compliant, so clients can feel secure in purchasing it.
The anaesthesia machine is suitable for inhalational anaesthesia delivery for adult, pediatric and neonatal patients.
Product category: Patient monitoring systems
ZD 120B Patient Monitor
- Adult, kid and newborn monitoring are supported;
- Slim body with a hidden handle, easy to move;
- Visual and audio alarm with triple colours alarm light;
- Lithium battery inside;
- No-fan design, match the requirements of multi-patient ward;
- Able to save data when the power supply fails.
Product category: Patient monitoring systems
Apollo N1 NICU Monitor
- 8.4 inch TFT touchscreen, lightweight & compact design;
- Weak current detection up to 0.1mv of ECG ensures monitoring performance on neonates;
- Anti-movement technology using on SpO2 and NIBP ensures accurate reading;
- Unique adjustable respiration lead for raising neonatal patient monitoring accuracy;
- 112mm built-in printer maximum output 7 waveforms simultaneously.
Product category: Patient monitoring systems
Apollo N2 Bedside Monitor
12.1 inch high-resolution LCD display; 35 million clicking times long life touch screen with Accutouch technology; Maximum 168 hours graphic and tabular trends of all parameters; Adjustable respiration lead helps to get accurate RESP reading for different patients; 120mm slim design which is modern and saving place; 112mm removable wide range printer can output 7 waveforms simultaneously.
- 12.1 inch high-resolution LCD display;
- 35 million clicking times long life touch screen with Accutouch technology;
- Maximum 168 hours graphic and tabular trends of all parameters;
- Adjustable respiration lead helps to get accurate RESP reading for different patients;
- 120mm slim design which is modern and saving place;
- 112mm removable wide range printer can output 7 waveforms simultaneously.
Product category: Patient monitoring systems
Apollo N4 ICU Monitor
• 15 inch high-resolution LED backlight LCD with touchscreen;
• High linear correlation NIBP monitoring results in different patients and environments;
• Optimized Sp02 algorithm ensures fast and accurate in low perfusion or patient movement;
• Plenty trends review records up to 168 hours for all parameters;
• 12 lead ECG optional for ICU/CCU requirement.
• High linear correlation NIBP monitoring results in different patients and environments;
• Optimized Sp02 algorithm ensures fast and accurate in low perfusion or patient movement;
• Plenty trends review records up to 168 hours for all parameters;
• 12 lead ECG optional for ICU/CCU requirement.
Product category: Patient monitoring systems
Apollo N5 OR Monitor
15 inch high-resolution LED backlight LCD with touchscreen; Modular design for convenient and efficient functions extension; High anti-interference ability with 8000V ECG isolation voltage to resist defibrillator shocking; Double isolation technique ensures IBP reading without interference; Own developed optional function on EtCO2 with 50ml/min flow rate; Friendly interface ensures efficient operations during the surgery; Optional VGA output for slave display in OR.
- 15 inch high-resolution LED backlight LCD with touchscreen;
- Modular design for convenient and efficient functions extension;
- High anti-interference ability with 8000V ECG isolation voltage to resist defibrillator shocking;
- Double isolation technique ensures IBP reading without interference;
- Own developed optional function on EtCO2 with 50ml/min flow rate
- Friendly interface ensures efficient operations during the surgery;
- Optional VGA output for slave display in OR.
Product category: Patient monitoring systems
iMD 12 Modular Patient Monitor
Ideal for operation room, Two module slots, plug and play; Embedded handle; Built-in 3-channel thermal printer; Two lithium batteries can continue iMD12 working 6 hours.
- Designed to meet different hospital needs. The basic parameters of the standard care needs;
- Has many optional upgrade modules with gold-plating contacts and techniques that may be further adapted to the intensive care category;
- Oximetry iMD 12 can be equipped at low perfusion quality clinical manifestations: blood pressure measurement with excellent anti-motility;
- A low sampling rate at the end of carbon dioxide breathing technique suitable for all ages of patients, especially newborns;
- With a variety of practical user interface, iMD12 provide reasonable layout and friendly operation, greatly increased its ease;
- No-fan design lowers the noise and the possibility of dust accumulation.
Product category: Patient monitoring systems
iMD8 Transport Patient Monitor
8.4-inch touchscreen; Embedded handle; Able to use module; 1.6kg of weight; 5 hours of battery life; No-fan design; Multiple interfaces for different departments.
- 8.4-inch touchscreen;
- Embedded handle and 1.6kg of weight, easy to carry;
- Able to use module, anaesthetic depth and EtCO2 monitor modules available;
- 5 hours of battery life, covers the requirement of transfer of patience;
- Vehicle power supply supported;
- No-fan design ensures low noise;
- Multiple interfaces for different departments.
Product category: Surgical lights, booms
Toplite-G7060 Operating Light
The surgical light adopts blue theca plating technology. This helps to create a light source that is close to natural light source.
Single, dual and triple domes are available to be equipped in one ceiling mount lamp.
The surgical light uses smooth and streamlined domes, which are easy to clean and meet the requirement of laminar flow purification in operating rooms.
Four types of single dome lamp include ceiling mounted type, wall-mounted type, mobile type with backup battery and mobile type without a backup battery.
The Toplite-G surgical light uses explosion-proof and transparent PC plastic dome cover.
A backup bulb system is used to avoid operation interruption in case of bulb failure.
Domes with diameters of 70cm and 60cm are optional for choice.
Our surgical light utilizes universal 6-joint spring suspension arms for better flexibility and position control.
Application
Heal Force operating light systems provide superior performance to satisfy the ever-growing user needs in diverse surgical fields, including general surgery, micro surgery, E.N.T., OB/GYN, orthopaedic and cosmetic surgery.
Single, dual and triple domes are available to be equipped in one ceiling mount lamp.
The surgical light uses smooth and streamlined domes, which are easy to clean and meet the requirement of laminar flow purification in operating rooms.
Four types of single dome lamp include ceiling mounted type, wall-mounted type, mobile type with backup battery and mobile type without a backup battery.
The Toplite-G surgical light uses explosion-proof and transparent PC plastic dome cover.
A backup bulb system is used to avoid operation interruption in case of bulb failure.
Domes with diameters of 70cm and 60cm are optional for choice.
Our surgical light utilizes universal 6-joint spring suspension arms for better flexibility and position control.
Application
Heal Force operating light systems provide superior performance to satisfy the ever-growing user needs in diverse surgical fields, including general surgery, micro surgery, E.N.T., OB/GYN, orthopaedic and cosmetic surgery.
Product category: Surgical lights, booms
Toplite-P7060 Operating Light
The quantum leap becomes especially apparent in the modern operating room, with criteria for safety, efficiency and economy. Bringing expertise in surgical illumination and ceiling supply units, Heal Force offers integrated operating room systems throughout the industry for the benefit of patients and medical staff.
Application
Heal Force operating light systems provide superior performance to satisfy the ever-growing user needs in diverse surgical fields, including general surgery, microsurgery, E.N.T., OB/GYN, orthopaedic and cosmetic surgery.
- The adoption of blue theca plating technology enables the Toplite-P surgical light to create a light source that is close to the natural light source.
- It offers a backup bulb system to ensure continuous operation in case of bulb failure.
- Shapes of domes are smooth and streamlined, which are easy to clean and meet the requirement of laminar flow purification in operating rooms.
- Domes with diameters of 70cm and 60cm are optional for choice.
- The surgical light uses explosion-proof and rippled PC plastic dome cover.
- Single, dual and triple domes are available to be equipped in one ceiling mount lamp.
- Our surgical light is economically priced while not compromising on performance.
Application
Heal Force operating light systems provide superior performance to satisfy the ever-growing user needs in diverse surgical fields, including general surgery, microsurgery, E.N.T., OB/GYN, orthopaedic and cosmetic surgery.
Product category: Surgical lights, booms
TOPLED-8060 Surgical Light
- TopLED series surgical light has optimized white LEDs that cover the entire visible colour spectrum required for demanding surgeries.
- The unique hollow design of the surgical light enables clean air to reach the surgical field directly, achieving the purification effect of laminar flow.
- The surgical light has almost no infrared and ultraviolet spectra, and it remains cool in the surgical field after long time operation.
- Streamlined surfaces reduce turbulence and resistance of the light.
- The adjustable focus handle controls projection angle of LED light and adjusts facula size and optical focal depth easily. The universal 6-joint spring suspension system ensures accurate positioning without drifting.
Product category: Surgical lights, booms
TOPSUN-7060 Surgical Light
Revolutionary LED Lighting Technology: Brilliant Four-Color-Mix Concept
Light sources with four colours ( Green, Amber, Red and Warm/Cold White) are mixed exactly where it is created (in the unique light beam condenser)- but not in the surgical field, which brings super high CRI (Ra>=95). Meanwhile, the New Light Source requires fewer LEDs to reach an ideal illuminance with lower irradiated heat.
Light sources with four colours ( Green, Amber, Red and Warm/Cold White) are mixed exactly where it is created (in the unique light beam condenser)- but not in the surgical field, which brings super high CRI (Ra>=95). Meanwhile, the New Light Source requires fewer LEDs to reach an ideal illuminance with lower irradiated heat.
- Four-Color-Mix
- 10-level Color Temperature Adjustment
- Automatic Illumination Control System for Shadow Compensation
- Ambient Light Mode for Endo-surgery
- 4 Intuitive Control Method for Free Choice
Product category: Operating tables and surgery tables
HFease400 Operating Table
HFease400 Series operating tables are tailored to a variety of positioning requirements from different surgical disciplines. You always find the one from HFease400 Series that meet your demands perfectly, no matter during ENT, ophthalmological, endoscopic, or any other procedures.
Application
HFease 400 is an electro-hydraulic operating table designed to meet universal surgical-positioning needs such as in Neurology, Ophthalmology, Gynecology, Urology, Minimal invasive Surgery, Hand & Arm surgeries, etc.
Application
HFease 400 is an electro-hydraulic operating table designed to meet universal surgical-positioning needs such as in Neurology, Ophthalmology, Gynecology, Urology, Minimal invasive Surgery, Hand & Arm surgeries, etc.
Product category: Operating tables and surgery tables
HFease600 Operating Table
HFease600 is an electro-hydraulic operating table that can be set up and positioned easily with handed remote, column mounted override system, optional pedal controller or central control station of OR integration solution.
It allows motor-driven, longitudinal movement of the table top up to 350mm that provide 1400mm space for C-arm or G-arm imaging.
With the lowest working height 600mm and lift capacity up to 500mm, integrated 2 groups of programmable memory for any complicated positioning setup, HFease600 can meet positioning needs in various open or minimal invasive surgeries.
It allows motor-driven, longitudinal movement of the table top up to 350mm that provide 1400mm space for C-arm or G-arm imaging.
With the lowest working height 600mm and lift capacity up to 500mm, integrated 2 groups of programmable memory for any complicated positioning setup, HFease600 can meet positioning needs in various open or minimal invasive surgeries.
Product category: Patient beds and nursing beds
COZY-100/200 ICU Patient Bed
This patient bed is for the fulfilment of the requirements in ICU. The special designs of the model will make the patient feels home-like whilst being cared for. Colour and furnishings are customizable.
- Wing-shaped spring piece releases pressure greatly;
- Various positions are available;
- Framework made by aluminium and stainless steel;
- Double breaking devices;
- One button for CPR (Cardiopulmonary Resuscitation) settings.
Neofuge 13R Laboratory Centrifuge
Heal Force high-speed personal centrifuge Neofuge 13R provide excellent centrifugal effect and is easy to be used with high reliability and safety.
- Maximum speed 15000rpm
- Maximum capacity 24×1.5/2.0ml, 16×5ml
- Temperature range -10℃~40℃
Neofuge laboratory centrifuge is equipped with a precise electronic imbalance detection system.
It uses a patented lid-lock system for safety.
It comes with an LCD display which indicates the speed, RCF, time, temperature, acceleration, braking rates and error message.
Neofuge 13R laboratory centrifuge is refrigerated by a CFC-free unit with a temperature control range of -10 to 40℃.
It provides rotor pre-cooling function.
Fixed angle rotor #1303 is offered as a standard accessory.
Five autoclavable(121℃, 20min) ultra-duralumin airtight rotors are available.
Neofuge 13R offers automatic rotor identification function.
It will give alarms if there is any abnormality.
Neofuge 13R provide a maximum speed of 13800rpm and a maximum RCF of 17458×g.
- Maximum speed 15000rpm
- Maximum capacity 24×1.5/2.0ml, 16×5ml
- Temperature range -10℃~40℃
Neofuge laboratory centrifuge is equipped with a precise electronic imbalance detection system.
It uses a patented lid-lock system for safety.
It comes with an LCD display which indicates the speed, RCF, time, temperature, acceleration, braking rates and error message.
Neofuge 13R laboratory centrifuge is refrigerated by a CFC-free unit with a temperature control range of -10 to 40℃.
It provides rotor pre-cooling function.
Fixed angle rotor #1303 is offered as a standard accessory.
Five autoclavable(121℃, 20min) ultra-duralumin airtight rotors are available.
Neofuge 13R offers automatic rotor identification function.
It will give alarms if there is any abnormality.
Neofuge 13R provide a maximum speed of 13800rpm and a maximum RCF of 17458×g.
Neofuge 1600 Centrifuge
Heal Force Neofuge 1600 benchtop laboratory centrifuge sets the standards in quality, design, and innovation that comes from a heritage of many years of experience. Neofuge 1600 offers maximum application versatility including a high-capacity, general-purpose centrifuge for cell harvesting; a high-speed centrifuge for separating cell lysates; and a micro centrifuge for DNA precipitations.
It offers a maximum speed of 15000rpm and maximum RCF of 23646×g.
Using a swing-out rotor, the laboratory centrifuge provides a maximum capacity of 4×400ml.
It uses a reliable "Strong drive" that is specialized for benchtop centrifuge.
9 acceleration and 10 braking curves are available.
Our laboratory centrifuge allows the storage of ten working modes for the convenience of future uses.
It utilizes a LCD display that indicates the speed, RCF, time, temperature, acceleration, braking rates and error message.
It will give alarms in case of any abnormal operating conditions.
Seven autoclavable (121℃,20min) ultra-duralumin airtight rotors are available.
Our laboratory centrifuge has automatic rotor identification function and rotor pre-cooling function.
It adopts an electronic imbalance detection system.
Our laboratory centrifuges use a patented lid lock system for safety.
It offers a maximum speed of 15000rpm and maximum RCF of 23646×g.
Using a swing-out rotor, the laboratory centrifuge provides a maximum capacity of 4×400ml.
It uses a reliable "Strong drive" that is specialized for benchtop centrifuge.
9 acceleration and 10 braking curves are available.
Our laboratory centrifuge allows the storage of ten working modes for the convenience of future uses.
It utilizes a LCD display that indicates the speed, RCF, time, temperature, acceleration, braking rates and error message.
It will give alarms in case of any abnormal operating conditions.
Seven autoclavable (121℃,20min) ultra-duralumin airtight rotors are available.
Our laboratory centrifuge has automatic rotor identification function and rotor pre-cooling function.
It adopts an electronic imbalance detection system.
Our laboratory centrifuges use a patented lid lock system for safety.
Product category: Laboratory equipment
HFsafe 1200LC Biological Safety Cabinet
With an extensive track record of safety, reliability and performance, HFsafe LC cabinets make ideal investments for a wide range of applications including work with infectious agents that require Biosafety Level 1, 2 or 3 containment.
Non-compromising safety
Patented Flow-saFe system automatically balances the downflow and inflow velocities to maintain user and sample protection.
You can keep a constant check on the airflow, window position etc.- anytime, anywhere.
When the front sash is closed, our intelligent speed control automatically reduces flow speed.
Negative-pressure, dual side walls prevent the possibility of contamination from leaks to the exterior environment.
Enhanced comfort and convenience
10 ° backward-slanted safety grade glass provides protection with more comfortable viewing than vertical sashes.
Counterbalanced sliding sash can be raised to a maximum height for easy introduction of large items.
The radiused edge prevents the potentially dangerous practice of placing materials in this area.
Constructed of seamless, non-porous, autoclavable Type 304 stainless steel for working plate, one-piece side/rear walls.
UV Decontamination
Programmable UV light timer simplifies operation while extending life time
Powerful UV irradiation ensures thorough disinfection of the complete chamber.
UV lamp with an interlocking safety switch function is designed for your safety.
Unique hidden UV lamp protects operator’s eyes from hurt.
Easy to Clean
The cabinet work zone has no welded joints to collect contaminants or rust.
Details of cabinet developed further to ensure easier cleaning with normal cleaning solvents
Airflow laminator protects the filter surface during wipe cleaning.
The optional multiple-piece stainless steel work surface is easier to remove and put into autoclave/washer.
The bottom sink is made of stainless steel type 304 with round corners and draining valves
Non-compromising safety
Patented Flow-saFe system automatically balances the downflow and inflow velocities to maintain user and sample protection.
You can keep a constant check on the airflow, window position etc.- anytime, anywhere.
When the front sash is closed, our intelligent speed control automatically reduces flow speed.
Negative-pressure, dual side walls prevent the possibility of contamination from leaks to the exterior environment.
Enhanced comfort and convenience
10 ° backward-slanted safety grade glass provides protection with more comfortable viewing than vertical sashes.
Counterbalanced sliding sash can be raised to a maximum height for easy introduction of large items.
The radiused edge prevents the potentially dangerous practice of placing materials in this area.
Constructed of seamless, non-porous, autoclavable Type 304 stainless steel for working plate, one-piece side/rear walls.
UV Decontamination
Programmable UV light timer simplifies operation while extending life time
Powerful UV irradiation ensures thorough disinfection of the complete chamber.
UV lamp with an interlocking safety switch function is designed for your safety.
Unique hidden UV lamp protects operator’s eyes from hurt.
Easy to Clean
The cabinet work zone has no welded joints to collect contaminants or rust.
Details of cabinet developed further to ensure easier cleaning with normal cleaning solvents
Airflow laminator protects the filter surface during wipe cleaning.
The optional multiple-piece stainless steel work surface is easier to remove and put into autoclave/washer.
The bottom sink is made of stainless steel type 304 with round corners and draining valves
Product category: Laboratory equipment
AlphaClean 1300 Vertical Laminar Flow Clean Bench
Heal Force biosafety cabinets and laminar flow clean benches set the standard in quality, design, and innovation that comes from a heritage of over 25 years’ experience. At Heal Force, we know how important it is to offer a high level of protection to operator, sample and environment with advanced technology. With an extensive track record of safety, reliability and performance, Heal Force cabinets and benches make an ideal investment for a wide range of applications.
Blower
Automatically compensates for normal power line variation, air disruption and filter loading. The motor consumes less energy, reduce heat output and operates more quietly.
illumination lamp
Illumination provides sufficient brightness to the working chamber.
UV lamp
Emission of 235.7 nanometers for most efficient decontamination. Automatic UV timer program saves your time during daily work
Safety grade glass
The front glass window provides protection from explosion and UV with a more comfortable viewing
Worktops
Standard constructed of seamless, non-porous type 304 stainless steel
Prefilter
Chemically and thermally enhanced technology increase filtration capacity and efficiency, together with ergonomic filter change design for easy maintenance
Friendly communication
Centred and angled down colour-display for better at-a-glance viewing of safety and performance data.
Long-life HEPA filter
Long-life HEPA filter provides high separability for particles. Self-compensation for the clogging of filters and life span indicator optimize working condition and minimizes services
Real-time airflow monitoring
The velocity of airflow and temperature are inspected and indicated on the control panel. Alert the user if the airflow is insufficient
Universal electrical outlets
Two standard electrical duplex receptacles, with ground fault interruption and splash covers.
Blower
Automatically compensates for normal power line variation, air disruption and filter loading. The motor consumes less energy, reduce heat output and operates more quietly.
illumination lamp
Illumination provides sufficient brightness to the working chamber.
UV lamp
Emission of 235.7 nanometers for most efficient decontamination. Automatic UV timer program saves your time during daily work
Safety grade glass
The front glass window provides protection from explosion and UV with a more comfortable viewing
Worktops
Standard constructed of seamless, non-porous type 304 stainless steel
Prefilter
Chemically and thermally enhanced technology increase filtration capacity and efficiency, together with ergonomic filter change design for easy maintenance
Friendly communication
Centred and angled down colour-display for better at-a-glance viewing of safety and performance data.
Long-life HEPA filter
Long-life HEPA filter provides high separability for particles. Self-compensation for the clogging of filters and life span indicator optimize working condition and minimizes services
Real-time airflow monitoring
The velocity of airflow and temperature are inspected and indicated on the control panel. Alert the user if the airflow is insufficient
Universal electrical outlets
Two standard electrical duplex receptacles, with ground fault interruption and splash covers.
Product category: Laboratory equipment
HF 100 CO2 Incubator
HF100 is a multi-gas incubator, with oxygen control function
Key Points
- 90℃ decontamination system
- Maintenance-free zirconium oxide sensor
- Precise CO2 control and immediate recovery
- Constant humidity
Innovative design for HF100 multi-gas incubator
Stainless steel chamber with easy-to-clean coved corners reduces contamination-prone surface
The turbulence-free chamber ventilation improves CO2, O2, humidity and temperature uniformity
The innovative design of water reservoir replacing water tray allows rapid recovery of optimal humidity
Temperature control
Direct heating enables rapid temperature recovery while air jacket provides isolation against ambient temperature fluctuations
PT1000 temperature sensor ensures stable temperature control with little gradient and prompt temperature recovery without overheat
Three temperature control settings (main heater, outer door and overheat protection)minimize condensation and yield precise temperature uniformity.
Precise CO2 control and immediate recovery
Drift free IR CO2 sensor responds extremely fast to gas concentration changes
Auto-zero runs automatically to recover the indicator to 'zero' every 24 hours
HEPA filter of CO2 inlet port can remove impurities and contaminants with efficiency 99.998% @0.2um
Standard CO2 cylinder auto changer alerts users and ensures continuous CO2 supply
O2 control
Maintenance-free zirconium oxide sensor - long life, good linearity and high precision
Oxide sensor is calibrated automatically (auto-cal) and stays in the incubator during the 90℃ decontamination routine
Well designed O2/N2 inlet module improves humidity stability in the chamber
Constant humidity
Larger water surface area provide by a water reservoir with inclined and rounded corners
A new water level alarm(audible and visible) alerts users when the water reservoir needs to be refilled
Standard humidity sensor ensures a constant high level of humidity to prevent cultures from drying out
User-friendly interface
Microprocessor with soft-touch control panel for optimum operation
Large-size TFT-LCD display for temperature, CO2, O2 concentration and RH
Comprehensive visual and audio alarms for all parameters
Diagnostic interface provide comprehensive solutions to frequently encountered problems
RS232 port standard for communication and external instrument logging
Contamination prevention
90℃ disinfection routine decontaminates the entire interior of the chamber while causes less damage to electronic components
In independent tests, a routine disinfection circle is proven to completely eliminate a variety of contaminants including mycoplasma
A completely smooth inner casing with rounded corner reduces the possibility of hidden contamination
Easy-removable, replaceable shelves make chamber cleaning a rapid and efficient process
Key Points
- 90℃ decontamination system
- Maintenance-free zirconium oxide sensor
- Precise CO2 control and immediate recovery
- Constant humidity
Innovative design for HF100 multi-gas incubator
Stainless steel chamber with easy-to-clean coved corners reduces contamination-prone surface
The turbulence-free chamber ventilation improves CO2, O2, humidity and temperature uniformity
The innovative design of water reservoir replacing water tray allows rapid recovery of optimal humidity
Temperature control
Direct heating enables rapid temperature recovery while air jacket provides isolation against ambient temperature fluctuations
PT1000 temperature sensor ensures stable temperature control with little gradient and prompt temperature recovery without overheat
Three temperature control settings (main heater, outer door and overheat protection)minimize condensation and yield precise temperature uniformity.
Precise CO2 control and immediate recovery
Drift free IR CO2 sensor responds extremely fast to gas concentration changes
Auto-zero runs automatically to recover the indicator to 'zero' every 24 hours
HEPA filter of CO2 inlet port can remove impurities and contaminants with efficiency 99.998% @0.2um
Standard CO2 cylinder auto changer alerts users and ensures continuous CO2 supply
O2 control
Maintenance-free zirconium oxide sensor - long life, good linearity and high precision
Oxide sensor is calibrated automatically (auto-cal) and stays in the incubator during the 90℃ decontamination routine
Well designed O2/N2 inlet module improves humidity stability in the chamber
Constant humidity
Larger water surface area provide by a water reservoir with inclined and rounded corners
A new water level alarm(audible and visible) alerts users when the water reservoir needs to be refilled
Standard humidity sensor ensures a constant high level of humidity to prevent cultures from drying out
User-friendly interface
Microprocessor with soft-touch control panel for optimum operation
Large-size TFT-LCD display for temperature, CO2, O2 concentration and RH
Comprehensive visual and audio alarms for all parameters
Diagnostic interface provide comprehensive solutions to frequently encountered problems
RS232 port standard for communication and external instrument logging
Contamination prevention
90℃ disinfection routine decontaminates the entire interior of the chamber while causes less damage to electronic components
In independent tests, a routine disinfection circle is proven to completely eliminate a variety of contaminants including mycoplasma
A completely smooth inner casing with rounded corner reduces the possibility of hidden contamination
Easy-removable, replaceable shelves make chamber cleaning a rapid and efficient process
Product category: Laboratory water purification systems
Smart Plus NE (T) Water Purification System
The industry's most complete water purification solution for highly regulated applications.
When your application requires the ultimate in water purity, Smart Plus provides the perfect solution. Consistently delivering water purity of 18.2MΩ.cm and underpinned by the advanced technologies, the Smart Plus enables you to focus on attaining accurate results while ensuring an uninterrupted workflow.
When your application requires the ultimate in water purity, Smart Plus provides the perfect solution. Consistently delivering water purity of 18.2MΩ.cm and underpinned by the advanced technologies, the Smart Plus enables you to focus on attaining accurate results while ensuring an uninterrupted workflow.
Product category: Laboratory water purification systems
Smart N Water Purification System
The Smart N system is a compact solution that combines the production of pure water and ultra-pure water in a single unit- eliminating the need for a pre-treatment stage upstream of the ultra-pure water system.
Simplest operation
Just four control keys allow for rapid operational readiness to improve user experience
Everything else is automatically managed by the built-in microprocessor control system
PIN-coded access to software set points prevents unauthorized changes to operation or system settings
Rapid cartridge replacement
One, two, three...rapid cartridge change due to quick-connection
Water purification progresses through separate modules, each with quick connects for simple individual replacement
Streamlined appearance and intelligent structural design with an easy-access door means the system can be located under a bench
Quick and easy sanitization and replacement of consumables reduce maintenance time
Reliable work
Integrated feedwater check
Good quality feedwater is a basic requirement for the degree of purity of the water produced, as well as for the long service lives of all purification stages.
An additional measuring cell permanently monitors the conductivity of the feedwater. Any exceeding of the limiting value is immediately displayed.
Conductivity measurement
The high-precision conductivity measuring cells are individually measured out and each value deposited in the system
The electronics are automatically calibrated and controlled prior to each measurement.
Temperature compensation
Platinum chip temperature sensors with an accuracy of +/- 0.1° C are used here
The temperature compensation can be switched off. USP requirements are fulfilled and optimal measurement reliability ensured.
Flexible dispensing
Remote water dispenser with ergonomic design comforts your water delivery experiences.
The height and direction of the dispenser is adjustable for different positions. Action radius is 25cm
The dispensing pistol can be removed from the dispenser arm to expand your working area.
Full recirculation guarantees water quality at point-of-use
Auto-volume dispense from 100ml to 60 litres and repeat dispensing
Foot-pedal activation is available to allow hands-free delivery in a clean room, further reducing the possibility of contamination.
Clear information
The large easy-to-read LCD display affords the user optimal convenience, with indication on:
The temperature in °C
The temperature-compensated conductivity/resistivity of water
The operating mode status, such as production, stand-by
Liquid level in the water tank
Consumable changing reminder
Water leakage protection
Water leakage sensor is linked to the microprocessor system to automatically cut off water input and activate the alarm in the situation of leakage
Space-saving
Each Smart series can be optionally installed space-savingly under the bench, in a lab table, or mounted directly to the wall(without the need for extra mounting material).
The remote dispenser can be connected to the main system at a distance of 3 meters. You can get water from height adjustable arm, or hand-held dispensing at each point-of-use
Simplest operation
Just four control keys allow for rapid operational readiness to improve user experience
Everything else is automatically managed by the built-in microprocessor control system
PIN-coded access to software set points prevents unauthorized changes to operation or system settings
Rapid cartridge replacement
One, two, three...rapid cartridge change due to quick-connection
Water purification progresses through separate modules, each with quick connects for simple individual replacement
Streamlined appearance and intelligent structural design with an easy-access door means the system can be located under a bench
Quick and easy sanitization and replacement of consumables reduce maintenance time
Reliable work
Integrated feedwater check
Good quality feedwater is a basic requirement for the degree of purity of the water produced, as well as for the long service lives of all purification stages.
An additional measuring cell permanently monitors the conductivity of the feedwater. Any exceeding of the limiting value is immediately displayed.
Conductivity measurement
The high-precision conductivity measuring cells are individually measured out and each value deposited in the system
The electronics are automatically calibrated and controlled prior to each measurement.
Temperature compensation
Platinum chip temperature sensors with an accuracy of +/- 0.1° C are used here
The temperature compensation can be switched off. USP requirements are fulfilled and optimal measurement reliability ensured.
Flexible dispensing
Remote water dispenser with ergonomic design comforts your water delivery experiences.
The height and direction of the dispenser is adjustable for different positions. Action radius is 25cm
The dispensing pistol can be removed from the dispenser arm to expand your working area.
Full recirculation guarantees water quality at point-of-use
Auto-volume dispense from 100ml to 60 litres and repeat dispensing
Foot-pedal activation is available to allow hands-free delivery in a clean room, further reducing the possibility of contamination.
Clear information
The large easy-to-read LCD display affords the user optimal convenience, with indication on:
The temperature in °C
The temperature-compensated conductivity/resistivity of water
The operating mode status, such as production, stand-by
Liquid level in the water tank
Consumable changing reminder
Water leakage protection
Water leakage sensor is linked to the microprocessor system to automatically cut off water input and activate the alarm in the situation of leakage
Space-saving
Each Smart series can be optionally installed space-savingly under the bench, in a lab table, or mounted directly to the wall(without the need for extra mounting material).
The remote dispenser can be connected to the main system at a distance of 3 meters. You can get water from height adjustable arm, or hand-held dispensing at each point-of-use
Product category: Laboratory water purification systems
Smart Mini Water Purification System
Compact new design for small volume ultra-pure water usage
Many laboratories require ultra-pure water every day - for HPLC or for other instrumental analyses- but only as small volumes at a time, up to a total of a few litres at the most.
However, this is no reason to do without professional, freshly-prepared ultra-pure water and buy expensive HPLC water. After all, with the repeated taking of small volumes from an HPLC water container, the quality of the water and the TOC-value no longer fulfil the specifications. The ultra-pure water is no longer ultra-pure!
Always fresh, Always available in the volume required. Always with the required quality. And always for only a few cents per litre!
Many laboratories require ultra-pure water every day - for HPLC or for other instrumental analyses- but only as small volumes at a time, up to a total of a few litres at the most.
However, this is no reason to do without professional, freshly-prepared ultra-pure water and buy expensive HPLC water. After all, with the repeated taking of small volumes from an HPLC water container, the quality of the water and the TOC-value no longer fulfil the specifications. The ultra-pure water is no longer ultra-pure!
Always fresh, Always available in the volume required. Always with the required quality. And always for only a few cents per litre!
Product category: Polymerase chain reaction (PCR)
X960 Real-time PCR Detection System
The X960 real-time PCR system is high-performance benchtop instrument giving you greater control of your experiment data. It delivers reliability, sensitivity, and accuracy, which is optimized to enable the broadest range of quantitative PCR applications.
Overview
Innovative Optical Design
Two channel (X960A) and five-channel (X960B) fluorescent detection system with an LED light source and high-resolution CCD
The optical system automatically collects data from all wells during data acquisition at the same time.
X960 can discriminate up to five targets in a single reaction well.
The optical filter sets are designed to maximize fluorescence detection for specific dyes in specific channels
Compatible with different reagent and consumables
Precise Temperature Control
Block utilizes most advanced Peltier-based technology with high amplification efficiency
Up to 6℃/s maximum ramp rate saves your valuable time dramatically
Two independent temperature control mode- block and tube, maximize control flexibility
Excellent temperature uniformity limits the variation between wells, ensuring the accuracy of low copy sample
Powerful Software
X960 Manager Software accommodates individual needs with intuitive navigation and customizable settings
The software can be used for a variety of applications including absolute/relative quantification, melting curve (dissociation curve), etc
With integrated powerful visualization tools, the data is analyzed on the machine directly
Humanization
Advanced programming function like gradient and touch-down
The machine can be connected with PC through WI-FI or LAN
The software allows you to manage and monitor several X960s from your computer.
Low noise, low energy consumption, long life-span
Overview
Innovative Optical Design
Two channel (X960A) and five-channel (X960B) fluorescent detection system with an LED light source and high-resolution CCD
The optical system automatically collects data from all wells during data acquisition at the same time.
X960 can discriminate up to five targets in a single reaction well.
The optical filter sets are designed to maximize fluorescence detection for specific dyes in specific channels
Compatible with different reagent and consumables
Precise Temperature Control
Block utilizes most advanced Peltier-based technology with high amplification efficiency
Up to 6℃/s maximum ramp rate saves your valuable time dramatically
Two independent temperature control mode- block and tube, maximize control flexibility
Excellent temperature uniformity limits the variation between wells, ensuring the accuracy of low copy sample
Powerful Software
X960 Manager Software accommodates individual needs with intuitive navigation and customizable settings
The software can be used for a variety of applications including absolute/relative quantification, melting curve (dissociation curve), etc
With integrated powerful visualization tools, the data is analyzed on the machine directly
Humanization
Advanced programming function like gradient and touch-down
The machine can be connected with PC through WI-FI or LAN
The software allows you to manage and monitor several X960s from your computer.
Low noise, low energy consumption, long life-span
Product category: Polymerase chain reaction (PCR)
T960 Thermal Cycler
The Genemate T960 Touch cycler is the flagship of Heal Force thermal cycling platform, offering unmatched performance for fast, accurate results and art interface with new ways to optimize protocols and meet any researcher’s unique needs. It enables you to choose from multiple interchangeable reaction modules, use the intuitive touch screen interface, optimize PCR assays using the gradient feature, transport your files and data with a USB flash drive, and connect to your laptop/PC for remote monitoring and future upgrading.
The intuitive touch screen makes running PCR easier than ever before!
The powerful, yet simple-to-operate user interface on the T960 system is driven by the 7-inch colorful touch screen. The large and intuitive graphical screen allows for real-time viewing of your temperature profiles. Additionally, the large navigation buttons put programming of the T960 Thermal Cycler at your fingertips. Set-up and navigation do not require the use of a stylus or mouse.
Realization of intelligence!
Adopt the Windows CE operating system to ensure the realization of the intelligent instrument, with more than 100 self-diagnostic functions.
T960 achieves the network connection independently, users can visit our official website to update version, which prevent the complex operations and inconvenience of the traditional program updating.
Remote Management System from anywhere and everywhere!
Access your T960 Thermal Cyclers everywhere you go with optional Remote Management Software, which allows you to manage and monitor over 200 thermal cyclers from your computer. Create and edit methods on your computer and download from or upload to your Thermal Cyclers systems as needed. The power of the T960 Thermal Cycler is just a click away.
Powerful heart and memory
2000 protocols on board, unlimited with use of USB memory stick
ARM Platform Windows CE operating system
USB2.0, RS232, RJ45 communication port
Patented portable design for blocks
Versatile configuration options
Gold/Silver coated blocks increase heat conduction efficiency
Portable design is easy for sample blocks interchange without maintenance
Reliable lids
Specially designed lids reduce the evaporation during PCR
Hinge utilized in laptop industry makes the lid open more flexible
The knob helps to accommodate a wide variety of PCR consumables
Environment & user friendly
Optimized to very low energy consumption
With its ultra-quiet ventilation, low noise levels are achieved, Enjoy it!
The intuitive touch screen makes running PCR easier than ever before!
The powerful, yet simple-to-operate user interface on the T960 system is driven by the 7-inch colorful touch screen. The large and intuitive graphical screen allows for real-time viewing of your temperature profiles. Additionally, the large navigation buttons put programming of the T960 Thermal Cycler at your fingertips. Set-up and navigation do not require the use of a stylus or mouse.
Realization of intelligence!
Adopt the Windows CE operating system to ensure the realization of the intelligent instrument, with more than 100 self-diagnostic functions.
T960 achieves the network connection independently, users can visit our official website to update version, which prevent the complex operations and inconvenience of the traditional program updating.
Remote Management System from anywhere and everywhere!
Access your T960 Thermal Cyclers everywhere you go with optional Remote Management Software, which allows you to manage and monitor over 200 thermal cyclers from your computer. Create and edit methods on your computer and download from or upload to your Thermal Cyclers systems as needed. The power of the T960 Thermal Cycler is just a click away.
Powerful heart and memory
2000 protocols on board, unlimited with use of USB memory stick
ARM Platform Windows CE operating system
USB2.0, RS232, RJ45 communication port
Patented portable design for blocks
Versatile configuration options
Gold/Silver coated blocks increase heat conduction efficiency
Portable design is easy for sample blocks interchange without maintenance
Reliable lids
Specially designed lids reduce the evaporation during PCR
Hinge utilized in laptop industry makes the lid open more flexible
The knob helps to accommodate a wide variety of PCR consumables
Environment & user friendly
Optimized to very low energy consumption
With its ultra-quiet ventilation, low noise levels are achieved, Enjoy it!
Product category: Incubators, warmers
8502H Infant Phototherapy Incubator
As our top one infant incubator is not a simple connection between incubator and phototherapy units. The sophisticated integration enables that newborn with hyperbilirubinemia could receive all-around blue-ray phototherapy within an appropriate, sheltered and reliable environment. Every detail including the distance between phototherapy units and patient, illumination intensity and so on results from persistent and strict research and experience for your newborn patient while it is rigorously carrying out the duty of protecting infant with best possible care.
●Phototherapy light intensity is constantly adjustable
●Time of bilirubin phototherapy can be paused, recorded and accumulated
●Phototherapy treatment duration can be pre-set and it automatically shuts off when a pre-set duration is reached
●The working life of LED phototherapy unit is lasting 20,000 hours
●Silicone mattress protect neonate from cauma while phototherapy treatment
●Microprocessor servo-controller ensures a precise and reliable temperature control
●Set temperature, monitored air temperature and baby skin temperature and heating power are distinguished in display
●Servo-controlled humidification system maintains the relative humidity at a constant level in the incubator
● Set and monitored humidity concentration are displayed separately
●Ultrasonic and low-temperature nebulized humidification protects neonate from bacterias pollution
●＞37℃ override temperature function
●Self-checking function for safety affirmative
●Audible and visible alarm indications for multiple failures with 3 priorities
●Chord alarm notes nurse farther than 8meters, but leaves asleep baby uninterrupted
●Aluminous framework for constant temperature keeping
●Continuous adjustment of mattress inclination up to 10º
●The drawer-type water reservoir is easily removable for cleaning and disinfection
●Nature air circulation system
●Cupboard cabinet
●RS-232 Connector
Applications
The 8502H not only can keep a stable environment for neonate patient but also can treat baby jaundice with intensive LED phototherapy simultaneously. With its compact design, ergonomics height adjustment and smooth trolley, the caregivers are easy to use it friendly in NICU. Widely applicable in all hospitals and clinics and optimize for preterm births or for some ill full-term babies or jaundiced baby.
Optional Accessories
Side door, front-rear door
Double-wall hood
Infant phototherapy unit (OSRAM tubes)
●Phototherapy light intensity is constantly adjustable
●Time of bilirubin phototherapy can be paused, recorded and accumulated
●Phototherapy treatment duration can be pre-set and it automatically shuts off when a pre-set duration is reached
●The working life of LED phototherapy unit is lasting 20,000 hours
●Silicone mattress protect neonate from cauma while phototherapy treatment
●Microprocessor servo-controller ensures a precise and reliable temperature control
●Set temperature, monitored air temperature and baby skin temperature and heating power are distinguished in display
●Servo-controlled humidification system maintains the relative humidity at a constant level in the incubator
● Set and monitored humidity concentration are displayed separately
●Ultrasonic and low-temperature nebulized humidification protects neonate from bacterias pollution
●＞37℃ override temperature function
●Self-checking function for safety affirmative
●Audible and visible alarm indications for multiple failures with 3 priorities
●Chord alarm notes nurse farther than 8meters, but leaves asleep baby uninterrupted
●Aluminous framework for constant temperature keeping
●Continuous adjustment of mattress inclination up to 10º
●The drawer-type water reservoir is easily removable for cleaning and disinfection
●Nature air circulation system
●Cupboard cabinet
●RS-232 Connector
Applications
The 8502H not only can keep a stable environment for neonate patient but also can treat baby jaundice with intensive LED phototherapy simultaneously. With its compact design, ergonomics height adjustment and smooth trolley, the caregivers are easy to use it friendly in NICU. Widely applicable in all hospitals and clinics and optimize for preterm births or for some ill full-term babies or jaundiced baby.
Optional Accessories
Side door, front-rear door
Double-wall hood
Infant phototherapy unit (OSRAM tubes)
Product category: Incubators, warmers
FXQ4H Infant Radiant Warmer
FXQ4H is the most advanced infant radiant warmer in the Heal Force warmer family, providing a nurturing, life-sustaining environment. Equipped with phototherapy units on top and underneath the bed, the baby can get better treatment from it. Low-pressure suction and resuscitation units are also available for this model.
●Pre-warm, manual control and skin temperature mode
●Microprocessor-based servo controlled temperature system with far-infrared heater
●Temperature deviation can be observed and amended in the front panel for error measurement
●Self-checking function for safety consideration
●Top and bottom phototherapy units
●The inclination of the bed can be adjusted.
●Heater head can be adjusted horizontally between 0-90°
●Foldable transparent protector
●Skin temperature sensor fall protect function to avoid warming
●Audible and visible alarm indications for multiple failures with 3 priorities
●Convenient X-ray cassette tray under infant bed
●A big baby bed is convenient for operation
●40 % Constant power warming function
●Double phototherapy units provide treatment for jaundice
●The vertical height can be adjusted.
●APAGER timer
●RS-232 connector
●Pre-warm, manual control and skin temperature mode
●Microprocessor-based servo controlled temperature system with far-infrared heater
●Temperature deviation can be observed and amended in the front panel for error measurement
●Self-checking function for safety consideration
●Top and bottom phototherapy units
●The inclination of the bed can be adjusted.
●Heater head can be adjusted horizontally between 0-90°
●Foldable transparent protector
●Skin temperature sensor fall protect function to avoid warming
●Audible and visible alarm indications for multiple failures with 3 priorities
●Convenient X-ray cassette tray under infant bed
●A big baby bed is convenient for operation
●40 % Constant power warming function
●Double phototherapy units provide treatment for jaundice
●The vertical height can be adjusted.
●APAGER timer
●RS-232 connector
Product category: Patient monitoring systems, Neonatal care equipment
Apollo N1-A Monitor
NICU Monitor. Devised especially for neonatal.
8.4-inch touch screen, ECG (3 lead), Suntech NIBP, Masimo SpO2, RESP, singal TEMP, HR/PR，Multiple display interface, respiratory asphyxia analysis, 112mm printer, lithium battery
8.4-inch touch screen, ECG (3 lead), Suntech NIBP, Masimo SpO2, RESP, singal TEMP, HR/PR，Multiple display interface, respiratory asphyxia analysis, 112mm printer, lithium battery
- 8.4 inch TFT touchscreen, lightweight & compact design;
- Weak current detection up to 0.1mv of ECG ensures monitoring performance on neonates;
- Anti-movement technology using SpO2 and NIBP ensures accurate reading;
- Unique adjustable respiration lead for raising neonatal patient monitoring accuracy;
- 112mm built-in printer maximum output 7 waveforms simultaneously.
Product category: Patient monitoring systems, Neonatal care equipment
Artemis4 Doppler Ultrasound Fetal Monitor
Doppler Ultrasound Fetal Monitor
10.2-inch large-screen colour TFT display, digital display and waveform oscilloscope of twins heart rate (FHR) and uterine contraction pressure (TOCO) value; Directly viewing 1:1 scale of display and print out waveform;7-wafer impulse ultrasound transducer, configured with special HR self-correlation reading algorithm to ensure correct and reliable fetal heart rate (FHR) measurement; Auto power failure protection and reliable rechargeable Li-ion battery can realize continual monitoring function.
10.2-inch large-screen colour TFT display, digital display and waveform oscilloscope of twins heart rate (FHR) and uterine contraction pressure (TOCO) value; Directly viewing 1:1 scale of display and print out waveform;7-wafer impulse ultrasound transducer, configured with special HR self-correlation reading algorithm to ensure correct and reliable fetal heart rate (FHR) measurement; Auto power failure protection and reliable rechargeable Li-ion battery can realize continual monitoring function.
Product category: Neonatal care equipment
DHD-C Transcutaneous Bilirubinometer
Early neonatal pathological jaundice is prone to bilirubin encephalopathy, so it is important to screen for early pathological jaundice.
The jaundice tester produced by our company applies optical fibre technology, photoelectric technology, electronic technology and data processing to percutaneous bilirubin measurement. The test is painless and harmless, as long as the probe is lightly pressed on the skin of the forehead of newborns and infants, the serum bilirubin concentration value can be directly measured in an instant.
The jaundice tester produced by our company applies optical fibre technology, photoelectric technology, electronic technology and data processing to percutaneous bilirubin measurement. The test is painless and harmless, as long as the probe is lightly pressed on the skin of the forehead of newborns and infants, the serum bilirubin concentration value can be directly measured in an instant.
Product category: eHealth, telemedicine / telematics / telemetry
Fingertip Pulse Oximeter Prince-100NW
The pulse oximeter uses a new generation of blood oxygen algorithm, which has higher measurement accuracy, and the accuracy reaches ±2％ in the range of 70-100％. SmalI and portable, it is equipped with 0.95-inch color LCD backlit screen, which is easy to carry. With spot measurement, continuous monitoring mode, over-limit automatic sound, light alarm, two-colour OLED display, supporting four-way switching display measurement data, it has good performance under weak perfusion and strong anti-interference ability. Most importantly, it can monitor your PI, PR, and SpO2.
- Two-colour OLED display, support four-way switching display measurement data
- Can display blood oxygen saturation, pulse rate, blood perfusion index, pulse intensity histogram, pulse volume waveform
- Voice broadcasts blood oxygen, pulse rate and automatically analyzes abnormal pulse rhythm results
- 12 sets of data storage, with memory function
- With spot measurement and continuous monitoring mode, over-limit automatic sound and light alarm
- Good performance under weak perfusion and strong anti-interference ability
- With the wireless transmission function, data can be uploaded to the mobile phone
Product category: eHealth, telemedicine / telematics / telemetry
CMS50S
• Wrist-style design, easy to wear
• Can continuously monitor SpO2 and PR during sleep and exercise
• 480 hours of sleep monitoring data storage
• Equipped with lithium battery, which makes it run for 3 hours
• With wireless transmission function can upload data to APP and PC software for further analysis
• Can continuously monitor SpO2 and PR during sleep and exercise
• 480 hours of sleep monitoring data storage
• Equipped with lithium battery, which makes it run for 3 hours
• With wireless transmission function can upload data to APP and PC software for further analysis
Product category: eHealth, telemedicine / telematics / telemetry
Wrist Pulse Oximeter -- Prince-100H
Prince-100H Oximeter can check the blood oxygen situation and grasp the quality of sleep. Small and easy to carry, it is equipped with nine major functions: silicone finger pad, multiple tests, sleep detection, data playback, optical frequency blood oxygen, anti-interference, internet support, smart power saving, and smart alarm.
• Tiny and light, wearable during monitoring
• Bright colour OLED display
• Continuous monitor and display parameters of oxygen saturation (SpO2), pulse rate (PR) and perfusion index (PI)
• Synchronous display for pulse column and plethysmogram
• Automatic start measuring by finger detection
• Excellent anti-interference performance
• Memory and review of up to 72-hour data with trend analysis
• Data transmission to a computer available by software
• Real-time audio & visual alarm for dangerous result and low voltage
• 2xAAA batteries power supply
• Tiny and light, wearable during monitoring
• Bright colour OLED display
• Continuous monitor and display parameters of oxygen saturation (SpO2), pulse rate (PR) and perfusion index (PI)
• Synchronous display for pulse column and plethysmogram
• Automatic start measuring by finger detection
• Excellent anti-interference performance
• Memory and review of up to 72-hour data with trend analysis
• Data transmission to a computer available by software
• Real-time audio & visual alarm for dangerous result and low voltage
• 2xAAA batteries power supply
Product category: eHealth, telemedicine / telematics / telemetry
Wrist Pluse Oximeter Prince-100G
Plus Oximeter Prince-100G is a wrist home sleep monitor. Through sleep monitoring and analysis, it gives us early warning of possible health diseases. The oximeter can display respiration rate, blood oxygen, pulse rate, blood perfusion, pulse volume waveform, pulse intensity histogram. And it can also generate a relative sleep report. Simple and easy, it can use the sleep monitoring APP.
-Can display respiration rate, blood oxygen, pulse rate, blood perfusion, pulse volume waveform, pulse intensity histogram
-Can be connected to adult silicone soft finger probe, mouth and nose air tube
-Can store 72 hours of monitoring data, can store up to 500 measurement data
-Support Bluetooth 40 transmission, data can be uploaded, replayed and analyzed through PC analysis software
-With sound and light alarm, adjustable upper and lower alarm limits
-Equipped with 500mAh lithium battery
-Can display respiration rate, blood oxygen, pulse rate, blood perfusion, pulse volume waveform, pulse intensity histogram
-Can be connected to adult silicone soft finger probe, mouth and nose air tube
-Can store 72 hours of monitoring data, can store up to 500 measurement data
-Support Bluetooth 40 transmission, data can be uploaded, replayed and analyzed through PC analysis software
-With sound and light alarm, adjustable upper and lower alarm limits
-Equipped with 500mAh lithium battery
Product category: eHealth, telemedicine / telematics / telemetry
PC-66A Infant Oximeter
• 3.5 inches high-resolution LCD colour screen
• SpO2, PR, PI, ear temperature, blood oxygen volume wavefront, pulse intensity histogram
• Parameter and trend data up to 500 hours storage
• Dual-mode Wireless and USB, personal oxygen I temperature management with app
• 2000mAh polymer lithium battery, with power-saving mode
• Equipped with metal bracket and base
• Gravity sensor can switch the display direction in both directions
• English menu available, multiple functions
• Adult and newborn blood oxygen probe optional
• SpO2, PR, PI, ear temperature, blood oxygen volume wavefront, pulse intensity histogram
• Parameter and trend data up to 500 hours storage
• Dual-mode Wireless and USB, personal oxygen I temperature management with app
• 2000mAh polymer lithium battery, with power-saving mode
• Equipped with metal bracket and base
• Gravity sensor can switch the display direction in both directions
• English menu available, multiple functions
• Adult and newborn blood oxygen probe optional
Product category: eHealth, telemedicine / telematics / telemetry
Easy ECG Monitor -- Prince-180D
This Easy ECG Monitor is intended for measuring and recording the ECG waveform and average heart rate of an adult patient. It is applicable for use in clinics and homes, and convenient to operate by the patients themselves. It has an interface for testing your blood oxygen. Three-lead monitor on the same screen, intimate design heart rate alarm, dual-mode measurement and data storage support you to learn your body better.
-It can store 3600 fast measured ECG waveforms or 30 hours
-Continuous measurement of ECG waveform
-3 integrated metal electrodes or external three-lead ECG lead wire
-3.5-inch color LCD screen
-It can store 3600 fast measured ECG waveforms or 30 hours
-Continuous measurement of ECG waveform
-3 integrated metal electrodes or external three-lead ECG lead wire
-3.5-inch color LCD screen
Product category: Polymerase chain reaction (PCR)
X320 Real-Time PCR Detection System
With the increasing demand for on-site real-time detection, Heal Force is about to launch a mobile fluorescent quantitative PCR instrument -X320, which has the advantages of vehicle-mounted capability, convenient portability, etc., can adapt to diversified and complex use environments, and is simple to operate and cost-effective.
- Simple and light, with 32-hole sample detection throughput
- 220V AC power supply or 24V DC power supply, with tablet computer and Wifi wireless function, can also be connected to PC computer
- Imported semiconductors combined with precise and efficient Peltier temperature control technology ensure the accuracy and uniformity of the reaction temperature, while achieving a faster temperature change rate
- It has dual-channel detection capabilities, compatible with some common fluorescent dyes on the market, such as FAM/SYBR, VIC/HEX/JOE/TET, etc., and can simultaneously detect two target genes in the same reaction tube
- The minimum acceptable reaction volume is 10μl, which can use precious samples more effectively and save reagent cost
- Ultra-high-brightness monochromatic LED as the light source, no need to preheat when starting up, maintenance-free and long service life
- The fluorescence collection device features a high-sensitivity refrigerated scientific-grade CCD camera with low background noise. It can collect the fluorescence signals of all samples at the same time to avoid data differences between samples caused by asynchronous signal collection
- 32 groups of equal-length dual-fiber light guide design, no correction required, effectively avoiding the edge effect and cross interference of the optical path
- Common analysis applications available, including qualitative analysis, absolute/relative quantification, melting curve, etc.
Product category: Laboratory equipment
HF 180 CO2 Incubator
Heal Force's new generation of CO2incubator will be available soon. The new generation HF180 incubator is sterilized by high temperature and dry heat at 180℃. The HEPA filter in the cabinet provides a 100-level air cleanliness culture environment, which can better protect the samples and improve the success rate of sensitive cells, such as stem cells and original generation cells and so on. It adopts the Internet of Things design, multiple data recording, and output functions, and can be equipped with a remote monitoring system.
- 8-inch touch screen operation; real-time dynamic parameter monitoring; data recording; trend graph display function
- 180℃ high temperature dry heat sterilization; easy to operate (including thermophilic bacteria, fungi, mold, etc.); sterilization time <2 hours
- The HEPA air filter is used in the cabinet, and the air in the cabinet will reach Class 100 cleanliness in 5 minutes, effectively protecting the culture
- Standard configuration imported TCD or IR sensor, with automatic calibration function, the sensor can withstand a high temperature of 180 ℃, no need to take out during the sterilization process
- Unique air duct design in the cabinet; imported fan; forced convection design of the air duct; better uniformity
- The rapid humidification design of the chassis reservoir, the humidity recovery speed is 3-4 times faster than the traditional humidification tray design, which is conducive to cell culture
- Intelligent and Internet of Things design, with data storage function, WIFI wireless communication available, equipped with USB, 4-20 mA analog signal and other output functions, can be connected to the laboratory remote monitoring system
Product category: Anesthesiology equipment, anesthesiology systems
Anaeston 6000 Anestheisa Machine
Anaeston6000 is an electronic-flow-controlled anesthesia delivery system.
With precise tidal volume delivery 20-1500mm, powerful controlled (VCV,PCV,PRVC) and assisted (PSV,SIMV-VC,SIMV-PC) ventilation capacity, it can be applied for patient range from adult, child to neonate.
Besides conventional ventilation monitoring, optional ETCO2, anesthetic gas (AG) and cerebral state index (CSI) monitoring can be added to help doubly boost anesthesia safety.
Once anesthetic gas (AG) monitoring is extended, the system will automatically calculate the consumption and cost of anesthetic agents, which is very important for clinical cost management.
Optional AIMS(anesthesia information management system) is also available now to support all-round workflow, from pre-operative visit, automatic operative-anesthesia record-keeping to post-operative analgesia management.
With precise tidal volume delivery 20-1500mm, powerful controlled (VCV,PCV,PRVC) and assisted (PSV,SIMV-VC,SIMV-PC) ventilation capacity, it can be applied for patient range from adult, child to neonate.
Besides conventional ventilation monitoring, optional ETCO2, anesthetic gas (AG) and cerebral state index (CSI) monitoring can be added to help doubly boost anesthesia safety.
Once anesthetic gas (AG) monitoring is extended, the system will automatically calculate the consumption and cost of anesthetic agents, which is very important for clinical cost management.
Optional AIMS(anesthesia information management system) is also available now to support all-round workflow, from pre-operative visit, automatic operative-anesthesia record-keeping to post-operative analgesia management.
Product category: Patient monitoring systems
Apollo N3 Patient Monitor
Apollo N3 is a transport patient monitor specially developed for emergency transportation and community medicine.
Anti-drop, water-proof and anti-collision mechanism has been well presented.
It can be operated and display patient's real-time vital signs information with 8.4-inch touch screen.
Anti-drop, water-proof and anti-collision mechanism has been well presented.
It can be operated and display patient's real-time vital signs information with 8.4-inch touch screen.
Product category: Patient monitoring systems
Lark-B25-DW Ceiling Pendant
Lark-B25-DW is a type of beam-based medical supply system that is widely used in spacious ICU area or lobby.
It has two suspended function racks, DRY (mainly for monitor, ventilator or other lift support instruments) and WET(mainly for infusion or other purposes), whose total weight load capacity up to 300kg。
The system can be palced solely or combined as a conjunct system whenever space is enough and random addition of critical care bed is required.
It has two suspended function racks, DRY (mainly for monitor, ventilator or other lift support instruments) and WET(mainly for infusion or other purposes), whose total weight load capacity up to 300kg。
The system can be palced solely or combined as a conjunct system whenever space is enough and random addition of critical care bed is required.
About us
Company details
For decades, Heal Force has been contributing to medical and technological progress. Since its inception in Hong Kong, China, in 1989, we've already built a reputation as a leading manufacturer and supplier committed to bringing forward medical and laboratory equipment for clients both at home and abroad. After nearly 30 years of continuous innovation and fast expansion, we gradually shifted from the distributorship of internationally renowned brands to diversified overseas business since the cooperation had laid a solid foundation for sustainable development relying on precise strategic direction, accurate market positioning, and correct management mode.
As the main force in the domestic biomedical device manufacturing industry, Heal Force integrates research and development(R&D), manufacturing, sales and service with many production and research bases. We possess various strong product lines with advanced international standards including Intelligent Operating Room, Life Science Instruments, Rehabilitation products, ICU, NICU, Infection Control, and Healthcare equipment exported to more than 100 countries and regions in the world. The whole group has approximately 1000 employees working on breakthrough solutions and technologies, among whom there is a professional R&D team with a strong background in engineering, mechanical, electronic subjects.
For the purpose of delivering trusted products and professional services in the medical and scientific fields, Heal Force has always insisted on forging excellent brands with high quality. Hence, we were widely praised by society winning various professional awards a couple of times. Meanwhile, we constantly make unremitting efforts to optimize supply chain management and production processes, providing high quality, reliable products, and professional services for the medical and scientific fields. Our products comply with regulations locally, not only in China but also internationally, which follow the standard of ISO 9001 and ISO 13485, and successfully get CE marked and FDA approved, etc. And various solutions are provided to serve a majority of users.
As the main force in the domestic biomedical device manufacturing industry, Heal Force integrates research and development(R&D), manufacturing, sales and service with many production and research bases. We possess various strong product lines with advanced international standards including Intelligent Operating Room, Life Science Instruments, Rehabilitation products, ICU, NICU, Infection Control, and Healthcare equipment exported to more than 100 countries and regions in the world. The whole group has approximately 1000 employees working on breakthrough solutions and technologies, among whom there is a professional R&D team with a strong background in engineering, mechanical, electronic subjects.
For the purpose of delivering trusted products and professional services in the medical and scientific fields, Heal Force has always insisted on forging excellent brands with high quality. Hence, we were widely praised by society winning various professional awards a couple of times. Meanwhile, we constantly make unremitting efforts to optimize supply chain management and production processes, providing high quality, reliable products, and professional services for the medical and scientific fields. Our products comply with regulations locally, not only in China but also internationally, which follow the standard of ISO 9001 and ISO 13485, and successfully get CE marked and FDA approved, etc. And various solutions are provided to serve a majority of users.
Company data
Number of employees500-999
Area of business- Electromedical equipment / Medical Technology
- Laboratory Equipment
- Diagnostics
- Physiotherapy / Orthopaedic Technology
- Commodities and Consumer Good for Surgeries and Hospitals
- Information and Communication Technology
- Medical Services and Publications