Manage stand orders
Select Option

MEDICOP d.o.o.

Nemcavci 81, 9000 Murska Sobota
Slovenia
Telephone +386 2 5391250
Fax +386 2 5391255
info@medicop.eu

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Contact

Bernard Kranjec

Sales manager

Phone
00386 2 539 12 56

Email
bernard.kranjec@medicop.eu

Our range of products

Product categories

  • 01  Electromedical equipment / medical technology
  • 01.06  Intense medicine / anesthesiology / respiration
  • 01.06.02  Respiration equipment, oxygen equipment
  • 01  Electromedical equipment / medical technology
  • 01.09  Hospital equipment, care equipment
  • 01.09.09  Equipment and apparatus for wards and examinations
  • 01  Electromedical equipment / medical technology
  • 01.09  Hospital equipment, care equipment
  • 01.09.14  Installation and equipment of supply conduits (gas, compressed air, oxygen, water, electricity, …)

Installation and equipment of supply conduits (gas, compressed air, oxygen, water, electricity, …)

Our products

Product category: Respiration equipment, oxygen equipment

Oxygen therapy portable units with shoulder bag

The portable device with bag includes a smaller cylinder with capacity of 2 l. This is a very light cylinder (weighing only 2.4 kg). It helps the patient to move as freely as possible. It is also possible to use this device in a car or other means of transport.

The oxygen flow can be regulated between 0 and 25 l/min by a stepwise adjustable pressure regulator. This type of Medicop regulator can be placed in any position, since its position does not have any influence on the flow rate.

The patient can breathe in oxygen through a nasal cannula, which is also part of the complete unit. The bag has two separate compartments, so other items can be stored in the bag in addition to the oxygen-therapy device.

More Less

Product category: Respiration equipment, oxygen equipment

Oxygen therapy portable unit with trolley

Oxygen cylinder (usually of capacity 5 liters or 10 liters) is fixed in vertical position to the trolley. Trolley is very stable. It is made of steel body and includes 5 castors with antistatic rubber. As an option the trolley includes also cover for the cylinder.

Configuration of complete device can be defined by user regarding to his specific needs. It is possible to use flowmeter (0 - 15 lit/min) with reusable or single-use humidifier, resuscitator and the suction units for these model of Medicop portable oxygen therapy device.

Cylinder is fixed to the plate by quick-release connectors and hence also the regulator can be disassembly by hands only, it is possible very quickly and simply to change empty cylinder with full one.

More Less

Product category: Respiration equipment, oxygen equipment

Oxygen therapy portable units with plate

Portable device with a plate which allows very quickly and simply to change empty cylinder with full one
Oxygen cylinder (usually of capacity 3 liters) is fixed in vertical position to the steel plate. So the complete device can stand alone anywhere on the floor.

However, the plate is designed in such a shape that it is possible to hang a device to the wall rail or any other carrier. Configuration of complete device can be defined by user regarding to his specific needs. It is possible to use flowmeter (0 - 15 lit/min) with reusable or single-use humidifier, resuscitator and the suction units for these model of Medicop portable oxygen therapy device.

Cylinder is fixed to the plate by quick-release connectors and hence also the regulator can be disassembly by hands only, it is possible very quickly and simply to change empty cylinder with full one.

More Less

Product category: Respiration equipment, oxygen equipment

Pressure regulators

Medicop pressure regulators are designed to be reliable, accurate and, most of all, safe for use. The entire body of the regulator is of brass and chrome plated. Inside the regulator is a core or membrane, which enables absolutely accurate pre-setting of the outlet pressure level. Each model is equipped with a mechanical safety valve, to make it absolutely impossible for high-pressure gas to come out of the regulator to the medical device or patient.

How clean is the gas that flows through the regulator?
On the inlet of each model there is a sinter filter, so that the gas which flows throughout the regulator is always absolute clean. Once it gets dirty the sinter filter can be easily removed by screwdriver. It is not necessary to remove any other part of regulator to access sinter filter. Each regulator has a manometer with very clear display, so the user can always see very clearly how much gas there is left in a cylinder.

How fast can you connect the regulator to a cylinder?
For connection of regulator to cylinder we have available several different types of connections Each connection has a handle, so that user does not need any tool to connect/ disconnect the regulator to/from the cylinder. Everything can be done by hands only.

More Less

Product category: Respiration equipment, oxygen equipment

Flowmeters

We offer very reliable and accurate medical flowmeters. Recently we developed new measuring tube for our flowmeters, which enables very fine adjustment of flow in the range between 0 and 15 lit/min (click on link NEW FLOWMETERS below)

Because flowmeters are used in plenty different ways in the health care institutions, we have available several different configurations of flowmeters in order to satisfy specific needs of each single user.

Direct wall - mounted and rail - mounted flowmeters
If an user does not have rail for fixation of medical equipment, the direct flowmeter is recommended. Because there are different direct-probes used in different countries, we can equip our flowmeters with probes of plenty different standards (DIN , AFNOR , British, UNI, C&U, Japanese, etc).

Type of gas
Flow meters for oxygen and air are available.

Humidifier
For long - term inhalation of oxygen a humidifier is needed. We have available reusable humidifiers as well as single-use humidifiers. Reusable humidifiers are completely made of polysulfone and so they could be sterilized up to 134°C. The capacity of bottle is large (300 ml). User can also choose between bubbleshumidifiers and nebulizers. Reusable humidifiers have the possibility for connection of thin mask-hose or large hose of 22 mm diameter.

Single and double models
With double flowmeter a user can treat two patients from one gas source at the same time, which means that you save time and reduce costs.

Different colors of accessories
Because different standards prescribe different colors for medical gases, Medicop accessories for flowmeters (hoses, connectors) are available in different colors to meet requirements of specific standards.

More Less

Product category: Equipment and apparatus for wards and examinations

Vacuum powered suction units

Vacuum powered suction units are connected to the central vacuum system directly or with a connector on a flexible tube. The basic device (the vacuum regulator) consists of the regulation button, a manometer, a shut-off valve, a central system connector, outlet connectors, a bacterial filter and, as optional equipment, a safety jar with shut-off valve, which prevents liquid from entering the device.

In combination with various suction jars, a Medicop vacuum regulator can form various types of suction units:
- portable suction unit with reusable suction jars,
- portable suction unit with suction bags for single use,
- mobile suction unit for field operation.

The manometer and the safety jar with the outlet connector can be rotated, so that the user can always put them in the most convenient position.

More Less

Product category: Equipment and apparatus for wards and examinations

Compressed air powered suction units

Compressed-air powered suction units generate a vacuum with compressed gas, usually air. For conversion of the compressed air into a vacuum, an ejector is used. The Medicop ejector can be connected to the central system of compressed gas directly or with a connector on a flexible tube, while compressed gas from a cylinder can also be used.

A button for fine and rough vacuum regulation, a manometer (from 0 to -1.0 bar) for display of the currently selected vacuum power, a silencer, connecting accessories, a bacterial filter and an optional safety jar with a shut-off valve, which prevents liquid from entering the device, are installed on the ejector.

In combination with various suction jars an ejector can form:
- portable suction unit with reusable suction jars,
- portable suction unit with suction bags for single use,
- mobile suction unit for field operation.

More Less

Product category: Equipment and apparatus for wards and examinations

Permanet drainages

Medicop permanent drainages are used for protracted aspiration procedures. The vacuum source passes through a water column, enabling setting of a low-level vacuum rate in range between 0 and -0.05 bar.

Powered either by compressed air or vacuum these devices are appropriate for most common aspirating purposes.

More Less

Product category: Installation and equipment of supply conduits (gas, compressed air, oxygen, water, electricity, …)

Medical gas manifolds

Seamles functionality, simple control.

Medical gas manifolds are designed to supply the correct pressure and volume of gas from gas cylinders or tanks to a healthcare facility’s pipeline system.

The typical medical gas manifold – for oxygen, N2O, CO2, or medical AIR – commonly consists, in accordance with EN ISO 7396-1 and HTM 02-01, of three sources, with automatic changeover from empty source to full source.

A liquid source is commonly used as the primary oxygen supply, while a dual-sided cylinder is used as a reserve supply-source. Medicop manifolds are specifically designed for optimal functionality and reliability, and offer users a number of very tangible advantages.

More Less

Product category: Installation and equipment of supply conduits (gas, compressed air, oxygen, water, electricity, …)

Pressure stabilizers

Safety and stable pressure always

Medicop SQ stations are stabilizers used in the supply of medical gases. The SQ stabilizer features dual low-pressure regulators, safety valves, pressure sensors, pressure gauges and an integrated Medican alarm.

The solution provides all key information on the status of inlet and outlet pressure, and the alarm can be connected both to additional slave panels and to the monitoring system via potential-free contacts or the Modbus TCP / RTU, 4-20 mA Duplicator.

More Less

Product category: Installation and equipment of supply conduits (gas, compressed air, oxygen, water, electricity, …)

Control - closing boxes

All gases in the building under complete control.

Control boxes are installed on individual floors and allow users to monitor the status of medical gases throughout the building. Medicop control boxes incorporate all features required by EN ISO 7396-1 and HTM 02-01 standards, like pressure monitoring, an emergency supply inlet, close-control over gas flow, and an alarm that warns of excessively high or low pressures.

Medicop control boxes are distinguished by the following key features and advantages...

More Less

Product category: Installation and equipment of supply conduits (gas, compressed air, oxygen, water, electricity, …)

Terminal units

Simple and reliable, with fast delivery.

Terminal units for medical gases have a special place at Medicop. Because we began producing and installing them back in 1984 we have more experience with terminal units than with virtually any other product.

Continuous development work and improvements over the years have made our terminal units among the best in the world. Medicop terminal units for medical gases boast a host of features and benefits: installation and connections are smooth and easy, they have a long shelf life, are widely compatible, are safe and clean, and delivery times are short and fast.

More Less

Product category: Equipment and apparatus for wards and examinations

Medilight bedhead units

Designed for the senses, engineered to perform

The BHU-MEDILIGHT bed head unit is the perfect solution for patient rooms and departments that require good, flexible lighting, power, communications and medical gas outlets exactly where and when they are needed. All Medicop unit housings are made of extruded aluminium and are powder coated.

BHU-MEDILIGHT bed head units conform in all respects to ISO EN 11197 and IEC EN 60601/1 standards and deliver a number of important features and benefits.

More Less

Product category: Equipment and apparatus for wards and examinations

Medicompact bedhead units

Designed for the senses, engineered to perform

The BHU-MEDICOMPACT bed head unit is perfectly designed for use with hospital beds that require access to a number of electrical, telecommunications and medical gas outlets. The unit housing is made of extruded aluminium and powder coated.

Medicop BHU-MEDICOMPACT bed head units conform in all respects to ISO EN 11197 and IEC EN 60601/1 standards and deliver a number of important features and benefits.

More Less

Product category: Equipment and apparatus for wards and examinations

Medintensive ceiling mounted bedhead units

Flexible mobility for a better treatment experience.

BHU-MEDINTENSIVE ceiling-mounted bed head units are aimed particularly at intensive care wards, where effective patient care requires a number of energy and medical gas unit connections, as well as room for various medical devices and accessories.

The BHU-MEDINTENSIVE unit consists of a double BHU-MEDILIGHT or BHU-MEDICOMPACT aluminium unit. A rail carrier is installed between the two units and is equipped with mobile consoles to accommodate various medical devices and accessories. Mobile consoles come in a variety of forms – as shelving, drawers, rails, stands for infusion equipment and more.

Consoles can be moved horizontally and rotated, and can also be made immobile as required. Medicop BHU-MEDINTENSIVE system provides the following features and benefits.

More Less

Product category: Installation and equipment of supply conduits (gas, compressed air, oxygen, water, electricity, …)

External medical gas supply units - Medicop CQ units

Medicop CQ 80PB and CQ 180PB are mobile units for external supply of medical gases, powered by a highpressure gas source from cylinders. The units include a system that enables continuous medical gas supply, which consists of standard solutions for central gas systems, integrated into the unit's basic enclosure in a manner that is convenient for easy transportation and / or field use.

The basic elements of such a supply unit are 2 high pressure reducing manifolds of MQ 80P or MQ 180 types from Medicop. Stations of this type are certified in accordance with the applicable medical devices directive, as part of central medical gas systems, in accordance with SIST EN ISO 7396-1. The main function of reducing stations is to reduce the pressure of medical gas from high-pressure sources (cylinder bundles) to the standard working pressure of medical gases, on a level of end-user units (adjustable range 1 - 10 bar). Reduced pressure combines through a medical line into a common outlet at the back of the supply unit, which is connected to the gas pipeline of the facility or the distribution line.

In addition to the components that supply medical gases, there is also an electronic system for monitoring the performance and alerting Medican personnel, which is also certified in accordance with the applicable Medical device Directive, for use in central medical gas systems. Medican system constantly provides an indication of all gas system performance parameters through which staff can obtain information on the status and volume of gas in cylinders, gas consumption, gas system operating pressures, and other parameters.

Alarming is also provided in the event which may affect the operational safety of the system, such as alarming before an upcoming emptying of gas cylinders and, etc.

More Less

Company news

Date

Topic

Download

Nov 19, 2020

NEW GENERATION OF WARD EQUIPMENT - video presentation

  • Increased flow capacity and maximum pressure stability
  • Perfect design and carefully selected high quality materials
  • Guaranteed long service life
  • Easy maintenance
  • An efficient and  user friendly experience
The new generation of small medical devices will represent a great advantage for the final products, which will enable the optimal implementation of health care according to their basic functions. At the same time, they will also provide more effective supportive therapies for the treatment of patients with the COVID-19 virus.

More Less

Nov 18, 2020

Bed head units

Medicop Bed Head Units deliver optimal direct and indirect lighting, for everything from treatment to reading. They employ contemporary design, which makes them as pleasing to the senses as they are functional, convenient and effective. Similarly, Medicop Bed Head Units are designed to be lightweight and highly adaptable, for maximum flexibility and compatibility. They are also exceedingly safe to use, indeed to live with. And just as important they are easy to both install and maintain, which keeps them working safely and effectively.

More Less

Nov 17, 2020

Medical gas supply units

"Technology in the service of mankind"

Equipment for Medical Gas Systems
High-quality and complete Medicop Central Medical Gas Systems include an advanced supervision system, gas manifolds, gas plants, control-closing boxes, terminal units and a pipeline system. Medicop Central Gas System equipment fully complies with the requirements of international standards EN ISO 7396-1 or HTM 02-01. Our professional staff can provide you with professional support from planning to a quick-response after-sales service.

More Less

Nov 16, 2020

Be inspired by Medicop

With our products, you can create a movement that saves lives worldwide.

Get to know our quality, technologically advanced and trustworthy products.
Feel the mission of our company. Watch a videos that inspires.

More Less

Nov 8, 2020

CENTRAL SUPERVISION OF MEDICAL GAS SYSTEMS - Monitor your gas systems - anytime, anywhere

One of the main advantages of our system is our new Supervision System with CAN-BUS technology, which allows users to collate and monitor the status and condition of all gases in a single place, and to distribute this information worldwide via the Internet from a computer terminal or mobile device. Two supervision models are available: one features a central LED control display, and a software solution that can be installed on and run from a workstation.

Our sales manager Bernard Kranjec will be happy to meet you virtual. Book your appointment and sign up with the matchmaking tool. Just click on the link below

More Less

About us

Company details

Medicop is an internationally renowned manufacturer of medical equipment and ambulance vehicles, widely recognised across Europe and well beyond as one of the best and most trustworthy providers of products designed to help patients and save lives everywhere.

Why do business with Medicop?

BECAUSE YOUR TIME IS VALUABLE
It is our absolute priority to respond to clients in the shortest time, as well as to supply the ordered goods sooner then expected. We always find the fastest and most favourable way to transport goods to our clients and keep them informed about the shipment status.

BECAUSE YOU NEED PRODUCTS TO SATISFY YOUR SPECIFIC NEEDS
We strive to meet your expectations with all comfort, convenience and safety features. Besides our standard product models and configurations, we offer you customization and adaptations to meet your specific requirements. We are pleased to listen to our clients' needs and fulfil them.

BECAUSE YOU ARE SPENDING TOO MUCH ON MAINTAINING YOUR EQUIPMENT
Making reliable products has been our goal throughout the decades. We not only perform the function tests for each device required by technical standards, we have put in place additional quality control in different phases of production to prevent all hazards that might cause unreliability of products.

BECAUSE SO MANY PEOPLE TRUST US
Our products are being used in almost every health-care institution in Slovenia and many other hospitals in 60 different countries. We are delighted that in our regular surveys of users 83% of our clients give us the highest satisfaction scores.

More Less

Company data

Number of employees

100-499

Area of business
  • Electromedical equipment / Medical Technology
  • Commodities and Consumer Good for Surgeries and Hospitals
  • Information and Communication Technology