Mpack sterilization indicator strip
--Mpack Type 4 Steam Indicator Strip is made by special paper strip, and coated with thermal ink, which conforms to the requirement for Type 4 in the standard ISO11140-1.
The appearance of strip is rectangular, and the size is 2cm x 10cm.
The indicator strip should be putted in the center of test package. When under steam saturated state, the steam indicator will change from yellow to black after sterilization process with 132℃, 3min or 121℃, 20min, which indicates the sterilization is effective.
--Mpack Steam Indicator Strip-Type 5 is made by Aluminum foil film, which conforms to the requirement for Type 5 in the standard ISO11140-1.
The appearance of strip is rectangular, and the size is 2.3cm x 6.3cm.
There is a black cotton paper inside the strip, the black cotton paper will move when under steam sterilization, if finally stay at the ”accept” part, which indicates the sterilization is effective.
--Mpack ETO Indicator Strip is made by special paper strip, and coated with thermal ink, which is complaint to the requirement for Type 4 in the standard ISO11140-1.
The appearance of strip is rectangular, and the size is 2cm x 10cm.
The indicator strip should be putted in the center of test package. When under the sterilization condition of Ethylene Oxide, the indicator will change from pink to brown after sterilization process, which indicates the sterilization is effective.
--Mpack VH202 Indicator Strip
Mpack Steam Indicator Strip is made by special plastic strip, and coated with thermal ink, which conforms to the requirement for Type 4 in the standard ISO11140-1.
The appearance of strip is rectangular, and the size is 2cm x 10cm.
The indicator strip should be putted in the center of test package. After sterilization, observe the color change of indicator. If the color change to yellow from red, the sterilization is effective, otherwise, the sterilization is noneffective.
More
Less